Contents

VEGA 3000C User Guide

 

VEGA 3000C is a new generation of payment terminal combining ergonomic design with class-leading high specification technologies. This combination ensures quicker transaction processing and a superb user experience.

 

 

Secure your device

In order to maintain your payment security, the default Manager password must be changed in Menu > User Settings > Manager password.

 


 

Power ON

The terminal is switched ON automatically after connection to power. The terminal start-up takes approximately 1 minute.

Info
The Vega 3000C does not contain a battery and must be connected to its mains power source via the enclosed adapter and cable at all times.

 

 


 

Wi-Fi and LAN Connection

The terminal enables connection to the internet via Wi-Fi.

If a physical LAN connection is required, then an RJ45-to-RJ45 LAN cable (not supplied) will need to be connected between the router and the payment terminal (as shown in the picture above).

 


 

Inserting paper into the printer

The thermal receipt printer is located in the upper housing, above the display of the payment terminal.

The paper roll exchange is done by:

 

Paper roll dimensions:

Paper roll ordering: Click here

 


 

Main screen

The initial user display contains information about the current state of the terminal and allows you to run some basic operations.

Information about the date and time, connection type, signal strength and battery status is placed in the status bar at the top of the screen.

A green flashing icon top left indicates the readiness to accept contactless cards. The centre of the touch screen is filled with the POS or merchant’s logo, and it can be chosen from several colour skins.

In the bottom of the screen there are virtual buttons to start the payment transaction, access the terminal’s setup menu or enter the Quick Menu.

 

 

1 – Status bar – The current status of the terminal
2 – Contactless indicator – Indicating readiness for acceptance of contactless cards
3 – Introductory graphics – Merchants can choose from several pre-set skins
4 – Menu – To access the menu functions of the terminal
5 – Quick pay – Triggers a payment transaction
6 – Quick menu – Menu featuring a terminal with function icons

 


 

Status bar description

The status bar contains all the important information in order to operate the payment terminal.

 

 

1 – Date – Present date in format dd:mm:yy
2 – Time – In format hh:mm:ss
3 – Wi-Fi – Wi-Fi signal strength
4 – AEVI Pay Server – Indication of AEVI Pay Server connection

 


 

Menu items

The terminal includes a number of functions required for correct terminal operation. To enter this list, use the virtual key “Menu” located in the middle at the bottom of the touch screen.

Selection of the required function is performed by touching the item on the display, scrolling is done by pressing the “Screen Up” and “Screen Down” and return to the previous menu by using the arrow “Back”.

The list of available functions depends on the specific terminal configuration and can differ from one application to another.

 

 

Warning
In order to maintain your payment security, the default Manager password must be changed in Menu > User Settings > Manager password

 


 

Keypad description

The keypad is an alternative way to navigate through the terminal without having to use a virtual keypad on the touch screen.

The attached figure describes the function keys. The keypad is also used for entering PIN, SSID’s, passwords, and other alpha-numeric data.

 


 

LAN/Wi-Fi connection

The terminal supports LAN and Wi-Fi connection.

Switching between LAN/Wi-Fi is performed by selecting “Menu”, “Administration” (enter admin PIN) and “Network settings” (or “Quick Menu” and “Network”) “Change connection” and selecting required type.

 

 

Wi-Fi connection Set Up

To connect to a Wi-Fi network or switch connection to Wi-Fi, select “Menu”, “Administration” (enter admin PIN) and “Network settings” (or “Quick Menu” and “Networks”), “Settings” and hit required Wi-Fi network from list of available networks.

For typing the password numerical keys are used by repeated press of numerical key to select the desired character (as used with keyboard phones) selected in “Menu” or “Quick Menu”.

If handshake is approved the internet connection is established.

 


 

First sale transaction

The terminal allows you to accept all types of payment cards. Contactless cards should be offered towards the top of the terminal’s display.

The chip card reader located on the bottom of the terminal is used for chip & PIN card acceptance.

For mag-stripe card acceptance the magnetic card reader is located on the right side of the terminal.

The standard payment transaction can be triggered by pressing the virtual button “Quick Pay” on the terminal display, or by typing amount on numeric keypad.

Another type of transaction can be actioned by selecting “Menu” or by the “Quick Menu” button.

 


 

Receipt Information

For each transaction the receipt is printed. The document contains key information about transaction and serves as a proof of transaction in the case of dispute claims.

 

1 Merchant name and address.

2 STAN – Ordinal number of transaction within the terminal.

3 Batch Number – Ordinal number of batch within the terminal. After closing the batch, this number is increased.

4 Terminal ID – Unique identifier of terminal within the terminal provider systems.

5 Merchant ID – Unique identifier of the mer­chant within the acquirer bank. If merchant uses more terminals, each terminal has got a unique TID, however MID might be the same for all terminals.

6 Bank Terminal ID – Unique identifier of the terminal within the acquirer bank. This might differ from Terminal ID, or might be the same.

7 Card Brand – Card brand such as VISA, Mastercard etc.

8 PAN – Unique number of the card contains information about Card brand, Issuer bank code and card number. Since this is sensitive information it is masked.

9 Application ID (AID) and Name – Identifies the application number on the card and its name. Corresponds with card type (Mastercard, Maestro, VISA, VISA Electron, V PAY etc.).

10 Transaction type – Type of transaction such as Sale, Merchant return, Reverse last transaction, etc.

11 Transaction currency and Amount – Currency of transaction. In case of non DCC it is currency of terminal (local currency in area of sale), in case of DCC it is currency of the card. Amount in given currency.

12 Authorisation code – Unique code of transaction. Used in case of dispute claims.

 

Life ring
If you need assistance, please contact our Support Team:
+44 (0)333 240 6000
[email protected]